Moto Brake Bleed Kit FactoryZ

Brake Bleeding Kit for Moto Brakes

Full syringe bleeding kit for Surron, Talaria, Eride Pro Moto Brakes.

Specs:

• Fits: All Moto Style Brakes, Pitbike Brakes, Dirtbike Brakes, ETC
• 1 syringe
• 2 syringe caps, 1 cover
• 1 Fuel hose to connect the syringe to the bleeder nipple
• 2 hose clamps, 1 bleeder nipple

How to Use:

1. Connect the fuel hose to the bleeder nipple on your caliper nipple then install the hose clamp to hold them together.
2. Crack open the nipple about .5-1 full turn so fluid can be sucked through with the syringe.
3. Be sure your master cylinder is full of fluid and watch it during this process, so you can continue to keep it full.
4. Slowly open the syringe pulling fluid and air out of your caliper.
5. Be sure to change the angle of the caliper and shake it around/vibrate it to move the air bubbles out the nipple.
6. Keep the nipple as the highest point in the system. Gravity will force the air bubbles out of the nipple.
7. Tighten the bleeder nipple all the way down and remove the fuel hose, enjoy your freshly bled system!

Ships From USA!